Whether you need a motorhome navigation app or an RV trip planner app, there’s something that’ll fit right in with your RVing style and make life a little easier. Finding the Best RV Apps in 2020. Of course, the first step to adding helpful RV and travel apps to your phone is finding the best ones. There are a few different ways to go about. EasyGPS by TopoGrafix is a free to use piece of software that will allow you to easily manage the data of various types of GPS devices (waypoints, maps, routes, etc). Sadly, EasyGPS for Mac has not been released yet, but you might want to try other tools that can perform similar tasks. Android: Dynamics NAV and Business Central for Android tablet and Android phone can be installed on devices with at least 1GB of RAM and Android 5.0 or higher. Windows Client – only for Microsoft Dynamics NAV There are two options to run the Windows Client on a Mac.
NAVY PERSONNEL COMMAND: 5720 Integrity Drive, Millington TN Address Correspondence to: Attn: PERS-### or BUPERS-### This is an official U.S. The Polar View navigation system is a comprehensive, user-friendly onboard system for the Mac OS X. The software combines the basic marine passage planning with the complex AIS capabilities as well as GPS navigation thus making the most robust and reliable software for sailors from all over the world. Marine Navigator Lite for Android.
An inevitable and vital part of your Rand McNally GPS device, Rand McNally Dock is an essential software. The major function of this application software is to provide the user with Free software upgrades and access to map updates. You can easily download the application software for your device. For this, read the following system requirements and procedure.
Minimum System Requirements Of Rand Mcnally Dock
Before you begin with the setup procedure, you have to make sure that your system is compatible with the software. For this, you have to check your system requirements. Fulfilling system requirements will make your system compatible.
For Windows
Supported Web Browsers
- Internet Explorer 7 and higher.
- Firefox 3 and higher.
- Chrome 4 and higher.
- Opera 10 and higher.
Operating System
- Windows XP
- Windows Vista
- Windows 7
- Windows 8
Hard Disk Space
- At least 8 GB.
For Mac
Supported Web Browser
- Safari 4 and higher
Operating System
- Mac OS X 10.5 and higher.
- Intel-based only (El Capitan, Sierra, High Sierra, and Mojave require XQuartz version 2.7.11. Catalina does not require XQuartz.)
Hard Disk Space
- At least 8 GB.
How To Download Rand Mcnally Dock?
Downloading the Rand Mcnally Dock on your preferred device is quite easy. This can be done using the official site of Rand Mcnally Dock. The Rand Mcnally Dock is a software application that is easily downloaded in most versions of Windows and Mac platforms. To download, follow the below-given set of instructions carefully.
- To begin with, Rand Mcnally Dock download, opt for the device you wish to download the application software for. Make sure that this device fulfills all system requirements that are mentioned above.
- If you are not sure about your system specifications, you can check it on your own. For this, on your Windows desktop, you will see a Computer icon. Right-click on this icon and then click on the properties from the drop-down list.
- Whereas, for Mac users, go to the Apple icon and there select “About this Mac”. This option will give you all the details about your system configuration.
- Now, you must launch your preferred web browser on your computer. For instance, you can open Internet Explorer, Google Chrome, Firefox, Safari, etc. In order to open it, you should look at your system’s Taskbar and click on it. In short, look at the very bottom left-hand side of the monitor screen. Alternatively, you will get the Browser icon on the “Desktop”.
- Thereafter, go to the official website of Rand Mcnally. For this, type in “ranmcnally.com” in the address bar of your browser. You will get the address bar at the top of the page. Then, press the enter key on your keyboard.
- On the homepage of Rand Mcnally, click on the “Support” tab. This tab is located at the top right corner of the window.
- Consequently, it will take you to the desired web page of Rand Mcnally Dock.
- The next step in the process is to download the setup file. But, for this, you need to verify the operating system of your device. This is generally because you need the different setup file for both Mac and Windows.
- Thereafter, on the support page, you will see links for download in “Windows” and “Mac” operating systems separately.
- If your device uses Windows as an Operating System you need to click on the link for “Windows” for downloading the Rand Mcnally Dock set up file.
- Otherwise, if you are using Mac as an operating system you will get two options. One is for the systems supporting the 32-bit version and the other one is for the 64-bit version. You have to click on either of the links accordingly.
- After that, click on the download link as per your preferred operating system.
- As a result, it will start downloading the software on your preferred device. You can easily check the progress of this process by looking at the footer at the download window. The process of Rand Mcnally download will take some time, wait for it to successfully complete.
- Generally, it is advised not to close the window or turn off your system in between the installation process. Doing this can result in a system ceasing to download the file further.
- Once the file is downloaded, it is automatically saved in the Downloads folder.
Nas For Mac 2019
This concludes the Rand Mcnally Downloading procedure successfully.
Installation of Rand Mcnally Dock
The next step after downloading is to install the Rand Mcnally software on your system. Follow the below-given steps carefully in order to install Rand Mcnally.
- To start with the process of Rand Mcnally Installation, locate the downloaded Rand Mcnally software on your system. Your system generally saves its downloaded files at its default location i.e Downloads folder. Hence, click on your system’s “Start” menu i.e. the Windows icon at the bottom left-hand corner of the Monitor screen. After that, you must click “Computer” from the right-hand panel of the Start menu. Thereafter, click on “Downloads” from the left-hand panel underneath the “Favorites” section. Here, you will find the downloaded Rand Mcnally software for the setup process.
- For Mac users, go to the Finder bar and search the “Downloads”. In the download folder, you will get the setup file of Rand Mcnally.
- Afterwards, you have to double-click on the downloaded setup file of Rand Mcnally Dock to open it.
- As a result, it will take you the Installation Wizard after extracting files.
- Subsequently, you will get a Security Warning pop-up box on your screen. After that, click on the “Run” tab located at the bottom of the window.
- The next pop-up window appearing on your screen is the “User Account Control” window. The window requests your permission to initiate certain changes that are important for the process. In order to allow certain changes, click on the “Yes” tab.
- After that, in the welcome window of Rand Mcnally Update, you have to click on the “Next” tab. This tab is located at the bottom of the page.
- By doing so, it will take you to the License Agreement window.
- In this window, you are required to read the terms and conditions of the document carefully.
- After that, if you agree to all the terms and conditions of the document, select the checkbox next to “I agree” option.
- Then, click on the “next” button which is located at the bottom of the window.
- The next window prompts you to choose your installation location where you want to save your file. For this, select the disk drive where you want to keep the installed software data from the drop-down menu. After that, click on the “Next” button.
- Consequently, the window will ask you “Ready to install the application?. Then, click on the “Install” button in order to move further with the installation process.
- As a result, it will start the installation process on your system. Wait until the installation process is going on.
- At last, click on the “finish” tab in order to exit the installer. This tab is located at the bottom of the window.
This concludes the Rand Mcnally installation procedure completely.
Hence, follow the above-mentioned steps to set up Rand Mcnally software on your preferred device.
I would like to find a solution how to use my recently purchased new Apple gadget for navigation purposes.
I want to have software in my MacBook to use it as fully operational GPS navigation system on board. Either it is a sailing boat, engine driven pleasure craft or 65 feet cruiser which sailing seven seas, like Volvo Ocean Race 65 one design state of art wonders.
In my previous posts I have made short overviews about some excellent marine navigation software, but unfortunately, none can be used on Mac machines except iPad, iPhone or iPod touch.
Finally, I found a solution good enough to stopping by and do a deeper research to see it fit my needs? It doesn’t mean that there are not other similar products in the market but need to start with one.
So, it is MacENC.
Here is phrase from About page
MacENC™ is the professional solution for the mariner that wants to take the Mac aboard for real-time display of position on the vector format S-57/S-63 ENCs (Electronic Navigational Charts), Navionics Charts and HotMaps from X-Traverse AND raster format BSB and Softcharts. Plug your GPS into your Mac and watch as your vessel moves along in real-time, plotting a track behind and logging a historic position on a seamless quilted digital chart.
Let’s take a, more or less, professional examination what this marvel offer.
Before even dive deeper I have checked a charting solution and prices for available nautical charts for this software. As I expected, nautical charts quality is perfect and prices are in affordable range, so let’s resume our research.
What are the MacENC features?
I would not like to count all GPS navigation software functions but try to find which ones are absent, if any, for safe and convenient professional deep-sea navigation.
Nas For Mac Users
What I mean Professional?
Let us assume that my MacBook Pro is only GPS navigation device on board the ship. No, no, there is other must-have navigational equipment like radar, autopilot, weather station, VHF radio, AIS, echo sounder and compass in their designated positions.
Well, what MacENC offers to us? Actually, all range features for safe nautical navigation. You get real Lat/Lon position, SOG (speed over ground), COG (course over ground) and all data which arise from for above mentioned. Satellites picture and NMEA (National Marine Electronics Association) monitor.
Actually, all range features for safe nautical navigation. You get real Lat/Lon position, SOG (speed over ground), COG (course over ground) and all data which arise from for above mentioned. Satellites picture and NMEA (National Marine Electronics Association) monitor.
Navdesk For Mac
As far as I understand MacBook could be connected to another device and GPS data is repeated to an Autopilot for instance. Although, you can connect to my mentioned must have devices and Mac screen be able to show wind speed, depth under the keel, heading and sea temperature, as well.
So far, like on navigation bridge of an IMO (International Maritime Organization) adopted merchant ship.
What would I miss?
Let’s skip GMDSS (The Global Maritime Distress and Safety System). I have my opinion (not only my) about this system. Just my two cents. All merchant marine navigation officers GMDSS certificate is one of must paper in their folio. There is every five-year refreshment course blah, blah. In practice, this system almost never been used and
Just my two cents. All merchant marine navigation officers GMDSS certificate is one of must paper in their folio. There is every five-year refreshment course blah, blah. In practice, this system almost never has been used and knowledge fading away. No one even does not want to touch these knobs and buttons to avoid sending of false signal and get a fine for it.
I have been in real distress situations like ship collisions and man overboard accident. Never GMDSS was ignited. All communications were held using VHF radio or satellite phone. Almost all ships today have global internet communication on board so why to run so complicated GMDSS procedures.
Back to our review.
Charting.
Perfect raster and vector nautical charts with all range of abilities and features.
Zooming & Scrolling – From 1:5,000 up to 1:20,000,000 zoom. Imagine, how many paper charts to be stored in chart drawers and beautiful trees remain to be verdant.
This ensures that apple devices only worked on 64-bit resolutions. Architecture transformationWith the Mac OS X Snow leopard, the 32-bit architecture went into the dark in the history of constructing architecture for apple devices. 
As well as waypoints, routes, tracks, sail trimmer, alarms, AIS, Radar, weather, tides and help. All, just one click away.
You could easily send your route to family, friends or charterers to see it on Google map.
One fantastic feature, I did not meet in my marine practice, is TCP/IP Interface – Send (TCP) and receive (TCP or UDP) NMEA data over Wi-Fi to share with iPhone or iPad. You can take a sunbathes on flybridge and tapping iPhone to alter course or speed. Unbelievable!
Well, at least theoretically I am very satisfied with my research. Let’s find minimum technical aspects. How to connect GPS antenna? MacBook has not integrated GPS receiver as iPhone or iPad. I need to be clear how to connect other NMEA tools.
How to connect GPS antenna? MacBook has not integrated GPS receiver as iPhone or iPad. I need to be clear how to connect other NMEA tools.
To solve an absence of GPS antenna we have at least four solutions. USB antenna, Bluetooth antenna, iPhone or AIS. I will not describe details which could find here.
Remaining navigational equipment could be connected via USB port. Settings and details see on above link.
Charts available from X-Traverse.
From first look prices is not so low, about $ 200 for selected are, but if compare with updated paper nautical chart prices, about $15-$25 per chart, this is a tiny number of bucks.
From first look prices is not so low about $ 200 for selected are, but if compare with updated paper nautical chart price about $15-$25 per chart, this is a tiny number of bucks.
From first look prices is not so low about $ 200 for selected are, but if compare with updated paper nautical chart price about $15-$25 per chart, this is a tiny number of bucks.
What else? I looked through all main necessary features and found MacENC as good GPS navigation software for MacBook. Sailing area unlimited.
So, having MacBook Pro uploaded with GPSNavx marine navigation software we are ready to set sails to conquer new horizons.
Just to remind, for any reason, I would like to consider it as back-up navigation devices. Every serious long range marine craft have to carry stand-alone GPS navigation system. It is not a disputable theme.
Safe sailings to the allure of the seas!